Aluminium Boat

boat bow up and down

Trim up too severely, and the boat can begin to porpoise — its bow bobbing up and down. if that happens, trim down slightly or tab down a tad. for the most part, in calm waters, trim-tab use should be reserved for leveling the boat when weight is unevenly distributed and one side rides lower than the other.. This video shows you the basics of boat trim. it walks you through how to use the power trim on your outboard or sterndrive to your advantage; what it means to trim the boat up and trim it down. For example, when meeting a steep head sea, many boats run more comfortably and efficiently with the bow down slightly, allowing the sharper forward-v to knife through the waves. conversely, in a following sea and when overtaking waves, it is often safer to run with the bow up a bit to help prevent stuffing into the backside of a roller..

Edgewater 262cx

Boat stands

boat bow up and down When a boat planes, it rides on top of the water, instead of plowing through it. and it is normal for a boat to ride bow high until the boat comes up on plane. if your always plowing through the water, the bow will always be high. now if you hit the button full trim down.. Meanwhile, the plumb (3) and axe (4) bow will knife through the water without excessive force either up or down, unless the boat turns sideways, when it will start acting like a brake. keeping these bows moving through the water, regardless of pitch angle, is clearly very important in avoiding a pitchpole..